Call Us (972) 514-5000

Bryant by Carrier Package Unit 3 Ton Gas


This highly featured and reliable air conditioner is designed for years of reliable, efficient operation

Please, CALL for Availability & Cost


Share this product

Product Features



GP – Base unit with tin plated indoor coil hairpins and Stainless Steel HX (Single Phase Only)
GS – Stainless Steel HX
LT – 2% air leakage, tin plated indoor coil hairpins and louver metal outdoor grille.
LX – 2% air leakage, tin plated indoor coil hairpins, stainless steel HX, and louver metal outdoor coil grille
SP – Base unit with tin plated indoor coil hairpins, stainless steel HX and louver metal outdoor coil grille (Single Phase Only)
TP – Base unit with tin plated indoor coil hairpins (Single Phase Only)
Only used if ordering an option

Single-Packaged Products with Energy-Saving Features and Puron® refrigerant.

  • 0 SEER
  • 5 EER
  • 0% AFUE (Single phase models)
  • ECM Motor-Standard
  • Direct Spark Ignition
  • Low Sound Levels
  • Dehumidification Feature
  • Certified to leak 2% or less of nominal air conditioning CFM delivered when pressurized to 1-in.W.C.with all present air inlets, air outlets, and condensate drain port (s) sealed.

One-piece heating and cooling units with low sound levels, easy installation, low maintenance, and dependable performance.
Puron is Bryant’s unique refrigerant designed to help protect the environment. Puron is an HFC refrigerant which does not contain chlorine that can harm the ozone layer. The most important advantage of Puron refrigerant is that it has not been banned in future air conditioning systems as the traditional refrigerant R-22 has been. Puron refrigerant is in service in millions of systems proving highly reliable, environmentally sound performance.
Easy Installation
Factory-assembled package is a compact, fully self-contained, combination gas heating/electric cooling unit that is prewired, pre-piped, and pre-charged for minimum installation expense. These units are available in a variety of standard and optional heating/cooling size combinations with voltage options to meet residential and light commercial requirements. Units are lightweight and install easily on a rooftop or at ground level. The high tech composite base eliminates rust problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and incorporates a sloped drain pan which improves drainage and helps inhibit mold, algae and bacterial growth. On the outside metal base rails provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications. Each unit is converted from horizontal to downflow and includes two horizontal duct covers. Downflow operation is provided in the field to allow vertical ductwork connections. The basepan seals on the bottom openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER (Seasonal Energy Efficiency Ratios) of 14.0, 11.5 EER, and AFUE (Annual Fuel Utilization Efficiency) ratings up to 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when the room thermostat calls for heating. Standard units are furnished with natural gas controls. A low-cost field installed kit for propane conversion is available for all units.
Low NOx units are designed for California installations. These models meet the California maximum oxides of nitrogen (NOx) emissions requirement of 40 nanograms/joule or less as shipped from the factory and MUST be installed in California Air Quality Management Districts and wherever a Low NOx rule exists.
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which provides for clean and efficient combustion. The large monoport on the inshot (or injection type) burners seldom, if ever, requires cleaning. All gas furnace components are accessible in one compartment.
Turbo-tubular™ heat exchangers are constructed of aluminized steel for corrosion resistance and optimum heat transfer for improved efficiency. The tubular design permits hot gases to make multiple passes across the path of the supply air. In addition, dimples located on the heat exchanger walls force the hot gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan motors are designed to help reduce energy consumption and provide for cooing operation down to 40°F (4.4°C) outdoor temperature. Motormasterr II low ambient kit is available as a
field-installed accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate thermostat without anti-short cycle protection is used the Time Guard II field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter driers are used to promote clean, unrestricted operation. Each unit leaves the factory with a full refrigerant charge. Refrigerant service connections make checking operating pressures easier.
High Pressure Switch provides added reliability for the compressor.
Indoor and Outdoor coils are computer-designed for optimum heat transfer and efficiency. The indoor coil is fabricated from copper tube and aluminum fins and is located inside the unit for protection against damage. The outdoor coil is internally mounted on the top tier of the unit.
Low sound ratings ensure a quiet indoor and outdoor environment with sound ratings as low as 73dBA.
Easy to service cabinets provide easy 3-panel accessibility to serviceable components during maintenance and installation. The basepan with integrated drain pan provides easy ground level installation with mounting pad. A nesting feature ensures a positive basepan to roof curb seal when the unit is roof mounted. A convenient 3/4-in. (19.05 mm) wide perimeter flange makes frame mounting on a rooftop easy.
Standard horizontal metal duct covers with insulation come with the unit and cover the horizontal duct openings. These can be left in place if the units are converted to downflow.
Integrated Gas Control (IGC) board provides safe and efficient control of heating and simplifies trouble-shooting through its built-in diagnostic function.
Cabinets are constructed of heavyduty, phosphated, zinc-coated prepainted steel capable of withstanding 500 hours in salt spray. Interior surfaces of the evaporator/heat exchanger compartment are insulated with cleanable semi-rigid insulation board, which keeps the conditioned air from being affected by the outdoor ambient temperature and provides improved indoor air quality. (Conforms to American Society of Heating, Refrigeration and Air Conditioning Engineers 62.2.) The sloped drain pan minimizes standing water in the drain. An external drain is provided.

Warning: this product contains a chemical known to the State of California to cause cancer.


Technical Specifications


Weight 349 Pounds (lbs)
Length 32.625 Inches (In)
Width 48.1875 Inches (In)
Height 51.75 Inches (In)
AFUE 81%
Blower Motor HP 3/4 HP
Blower Motor RPM 1000
Blower Motor Speeds Variable
Blower Motor Type ECM (Electronically Commutated Motor)
Blower Wheel 11″ X 10″
BTU Input 90000
BTU Output 73000
Circuit Breaker – Max Amps 40
Circuit Breaker – Min Amps 27.8
Compressor Scroll
Condenser Motor HP 1/5 HP
Condenser Motor RPM 810
Cooling Rated Capacity Btu/h 36000
Cycle/Hertz 60 Hz
Drain Connection Size 3/4″
Drive Type Direct
EER 11.5
Filter Size (2) 20″ x 12″ x 1″
Fuel Type Natural Gas
Gas Connection NPT
Heating Capacity 90000
Ignition Type Direct Spark
Locked Rotor Amps 79
Metering Device TXV
Phase Single
Rated Load Amps 16.7
Refrigerant R-410a
Sound Level (dBA) 74
Stage Single
Tonnage 3
UL Listed


Warranty Information

General Terms Of Limited Warranty*

Bryant Heating & Cooling Systems (hereinafter “Company”) warrants this product against failure due to defect in materials or workmanship under normal use and maintenance as follows. All warranty periods begin on the date of original installation. If a part fails due to defect during the applicable warranty period Company will provide a new or remanufactured part, at Company’s option, to replace the failed defective part at no charge for the part. Alternatively, and at its option, the Company will provide a credit in the amount of the then factory selling price for a new equivalent part toward the retail purchase price of a new Company product. Except as otherwise stated herein, those are Company’s exclusive obligations under this warranty for a product failure. This limited warranty is subject to all provisions, conditions, limitations and exclusions listed below and on the reverse (if any) of this document. OWNER-OCCUPIED, RESIDENTIAL APPLICATIONS This warranty is to the original purchasing owner and is transferable only to the extent and as stated in the Warranty Conditions and below. The warranty period in years, depending on the part and the claimant, is as shown in the chart below. Limited Warranty (Years) Product Item Original Owner Subsequent Owner Small Packaged Product Parts 10* (or 5) 5 Compressor 10* (or 5) 5 Aluminized Steel Heat Exchanger (if applicable) 20** (or 15) 15 Stainless Steel Heat Exchanger (if applicable) Life** (or 20) 20 * If properly registered within 90 days, otherwise 5 years (except in California and Quebec and other jurisdictions that prohibit warranty benefits conditioned on registration, registration is not required to obtain longer warranty periods ). See Warranty Conditions below. ** If properly registered within 90 days, otherwise fifteen (15) years for Aluminized Heat Exchanger or twenty (20) years for Stainless Steel Heat Exchanger. (except in California and Quebec and other jurisdictions that prohibit warranty benefits conditioned on registration, registration is not required to obtain longer warranty periods). See Warranty Conditions below. OTHER RESIDENTIAL APPLICATIONS (Apartments, Rental Properties, etc.) The warranty period is five (5) years on all parts. The warranty is to the original owner only and is not transferable. OTHER APPLICATIONS The warranty period is five (5) years on the heat exchanger, five (5) years on the compressor, and one (1) year on all other parts. The warranty to the original owner only and is not transferable.


There are no reviews yet.

Be the first to review “Bryant by Carrier Package Unit 3 Ton Gas”