Call Us (972) 514-5000

Product Features

For more information Check:

https://www.rheem.com/group/rheem-air-handlers-standard-efficiency-psc-motor-rh1p

  • The most compact unit design available, all standard heat air handler models only 421/2 to 551/2 inches 1079 to 1409 mm] high.
  • Attractive pre-painted cabinet exterior.
  • Rugged wall steel cabinet construction, designed for added strength and versatility.
  • 1.0″ foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance.
  • Four leg blower motor mount.
  • Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience.
  • Traditional open wire element design for heat applications.
  • Field convertible for vertical downflow, horizontal left hand or right hand air supply.
  • 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors.
  • Indoor coil design provides low air side pressure drop, high performance and extremely compact size.
  • Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil.
  • Coils are constructed of aluminum fins bonded to internally grooved copper tubing.
  • Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils.
  • Supply duct flanges provided as standard on air handler cabinet.
  • Provisions for field electrical, connections available from either side or top of the air handler cabinet.
  • Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet.
  • Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2 inches [51 mm] for 11/2 inch [38 mm] conduit.
  • Front refrigerant and drain connections.
  • Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.
  • Factory-installed high efficiency indoor coil.
  • Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.
  • Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.
  • 11/2 ton [5.3 kW] through 5 ton [17.6 kW] models are between 421/2 to 551/2 inches [1080 to 1410 mm] tall and 22 inches [559 mm] deep.
  • All models meet or exceed 330 to 400 CFM [156 to 189 L/s] per ton at .3 inches [.7 kPa] of external static pressure.
  • Enhanced airflow up to .7″ external static pressure

Technical Specification

For more information Check:

https://www.rheem.com/group/rheem-air-handlers-standard-efficiency-psc-motor-rh1p

Model #       

RH1P2417

RH1P3617

RH1P4821

RH1P6024

STANJA

STANJA

STANJA

STANJA

Tonnage

2

3

4

5

Voltage

208-230

208-230

208-230

208-230

Motor

1/3

1/2

3/4

3/4

Gas Line

3/4.

3/4

7/8

7/8

Liq Line

3/8

3/8

3/8

3/8

Weight lb

95

104

146

181

Deep

21 11/16

21 11/16

21 11/16

21 11/16

Width in

17.5

17.5

21

24

Height in

42.5

42.5

50.5

55.5

Warranty Information

Rheem will furnish a replacement for any part of this product which fails in normal use and service within the applicable periods stated, in accordance with the terms of the limited warranty.

Conditional Parts (Registration Required) ……….Ten (10) Years

For complete details of the Limited and Conditional Warranties, including applicable terms and conditions, contact your local contractor or the Manufacturer for a copy of the product warranty certificate.

For more information Check:

https://www.rheem.com/warranties

Reviews

There are no reviews yet.

Be the first to review “(1) Rheem Classic Air Handler”